CGMeter

Weight

Nose Weight:
Grams
lb

Left Weight:
Grams
lb

Right Weight:
Grams
lb

Total Weight:
Grams
lb

Tare

Balance DRY

Desired CG location:
mm
inch

Current CG Location:
mm
inch

For accurate measure, set the plane in flight level.
Balance Full Tank

Calculated CG:
mm
inch

Status:

Battery Voltage:
V
Runtime:

Data Entry


Landing gear configuration:


Distance Mains to Nose


Distance Mains to CG


Distance Mains to Correction point

If the correction point is located aft from main gear, enter the distance in negative numbers

Fuel capacity


Distance Mains to the Center of the fuel tank

In Bicicle planes, if the center of the tank is located forward from main gear, enter the distance in negative numbers

Submit

New Connection


Connect


Sensor Calibration

Warning! You will erase the factory calibration data, you need a calibrated weight to execute the calibration procedure.

Calibration weight to be used


Nose/Tail sensor

Nose Weight:
Grams
lb


1. Remove all weight over the yellow sensor and click on the "Calibrate Zero" button.

Calibrate Nose Zero


2. Place the calibration weight over the yellow sensor and click on the "Calibrate Weight" button.

Calibrate Nose Weight



Right sensor

Right Weight:
Grams
lb


1. Remove all weight over the blue sensor and click on the "Calibrate Zero" button.

Calibrate Right Zero


2. Place the calibration weight over the blue sensor and click on the "Calibrate Weight" button.

Calibrate Right Weight



Left sensor

Left Weight:
Grams
lb


1. Remove all weight over the red sensor and click on the "Calibrate Zero" button.

Calibrate Left Zero


2. Place the calibration weight over the red sensor and click on the "Calibrate Weight" button.

Calibrate Left Weight